Transactions on Cryptographic Hardware and Embedded Systems, Volume 2021
Rainbow on Cortex-M4
README
This repository contains the official ARM Cortex-M4 implementation of the NISTPQC signature finalist Rainbow. For details of the scheme please visit the Rainbow website.
The implementation is described in more detail in this paper.
Authors of this M4 implementations:
Rainbow Submitters:
- Ming-Shing Chen
- Jintai Ding
- Matthias J. Kannwischer
- Jacques Patarin
- Albrecht Petzoldt
- Dieter Schmidt
- Bo-Yin Yang
We target the EFM32GG11 Giant Gecko Starter Kit which has a EFM32GG11B820F2048GL192 Cortex-M4 core.
It has
- 515 KiB RAM
- 2 MiB Flash
- runs at at most 72 MHz
Contents
Results
See Table 2 of the paper.
Setup
Firstly, recursively clone this repo:
git clone --recurse-submodules https://github.com/rainbowm4/rainbowm4
In case you got the code from the code package submitted to NIST or the TCHES artifact, you need to initialize the efm32-base submodule by
git init
git submodule add https://github.com/ryankurte/efm32-base
cd efm32-base
git checkout ac1c323d77782fd8f39940bcf5fd857a9a8327a8
cd ..
This code is based upon pqm4 and EFM32-getting-started.
You may want to follow the more complete setup description of EFM32-getting-started.
As usual, you will need the arm-none-eabi toolchain toolchain installed.
For flashing binaries onto the board, you will need to install the J-Link Software and Documentation Pack. After installing, make sure that JLinkExe is in your PATH.
For using the scripts you will need Python and pyserial.
If you are on Arch Linux, you can simply run the following and should be done:
yay -S arm-none-eabi-gcc jlink-software-and-documentation python-pyserial
On Ubuntu, you can install pyserial and arm-none-eabi toolchain using:
sudo apt install gcc-arm-none-eabi python3-serial
You will have to install the J-Link .deb manually.
Connecting the board
Connect the board to your host machine using the mini-USB port (upper left corner of the board).
This provides it with power, and allows you to flash binaries onto the board.
It should show up in lsusb as SEGGER J-Link OB.
If you are using a UART-USB connector that has a PL2303 chip on board (which appears to be the most common),
the driver should be loaded in your kernel by default. If it is not, it is typically called pl2303.
On macOS, you will still need to install it (and reboot).
When you plug in the device, it should show up as Prolific Technology, Inc. PL2303 Serial Port when you type lsusb.
Using dupont / jumper cables, connect the RX/RXD pin of the USB connector to the PE8 pin (Pin 12 on the expansion header).
Depending on your setup, you may also want to connect the GND pin .
For the full pin-outs of the Giant Gecko's see Section 4 in the User Guide.
Flashing
The Giant Gecko comes with a Segger J-Link debugger that we use to flash binaries on the board.
You can simply run
./flash.sh <BINARY>
e.g.,
./flash.sh bin/crypto_sign_rainbowI-classic_m4_test.bin
to program the binary onto the board.
For details see flash.sh and flash.jlink.
Running it
Parameter Sets
We implement the three level 1 parameter sets rainbowI-classic, rainbowI-circumzenithal, rainbowI-compressed.
In addition, we include implementations using the alternative direct representation F_16 = F_2[X]/(X^4+X+1).
These are called rainbowI-classic-tweaked, rainbowI-circumzenithal-tweaked, rainbowI-compressed-tweaked.
You can select the parameter set in the binary name and implementation path, e.g., for rainbowI-classic run
make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
Implementations
This code package includes our new m4 implementation, but also the reference implementation ref from the Rainbow submission package.
You can select the implementation in the binary name and the path, e.g., for the reference implementation, run
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_test.bin
Programs
We have different programs for different purposes:
test.c: Tests if signatures verify correctly.speed.c: Benchmarks the scheme at a low frequency (16 MHz) and outputs cycle counts.testvectors.c: Generates deterministic testvectors which can be used to cross check different implementations.nistkat.c: Uses the same deterministic RNG that was provided by NIST which allows to compare to NISTKATs.stack.c: Measures the stack consumption of the implementations.hashing.c: Profiles how much of the run time is spent in hashing operations.
When building, those can be selected in the binary name, e.g., for test, run
make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
Hardware crypto
The Giant Gecko has hardware support for AES and SHA256. We have included a variant of our implementation that uses
the hardware accelerator.
You can enable/disable it by setting the USE_HARDWARE_CRYPTO flag, e.g.,
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
By default, it is disabled (0).
Precomputation
Rainbow signing (for classic and circumzenithal) can be speed-up by pre-computing the bitslicing of the secret key.
The pre-computation can be enabled by using the PRECOMPUTE_BITSLICING flag, e.g.,
PRECOMPUTE_BITSLICING=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
By default, it is disabled (0).
Automated tests and benchmarks
The above options can all be combined.
To verify that all implementations produce the same testvestors as the reference implementations, you can run
./nistkat.py
For running benchmarks, we provide scripts as well
# speed benchmarks
./run_all_benchmarks.py
# hashing benchmarks
./run_all_hashing_bench.py
# stack benchmarks
./run_all_stack.py
# code size benchmarks
./run_codesize.py
List of binaries
Below is a exhaustive list of the commands building the useful binaries.
# original parameter sets
# test
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_test.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_test.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_test.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_test.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_test.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_test.bin
# speed
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_speed.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_speed.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_speed.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_speed.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_speed.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_speed.bin
# testvectors
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_testvectors.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_testvectors.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_testvectors.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_testvectors.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_testvectors.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_testvectors.bin
# nistkat
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_nistkat.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_nistkat.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_nistkat.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_nistkat.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_nistkat.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_nistkat.bin
# stack
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_stack.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_stack.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_stack.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_stack.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_stack.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_stack.bin
# hashing
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_hashing.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_hashing.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_hashing.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/ref bin/crypto_sign_rainbowI-classic_ref_hashing.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/ref bin/crypto_sign_rainbowI-circumzenithal_ref_hashing.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/ref bin/crypto_sign_rainbowI-compressed_ref_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed/m4 bin/crypto_sign_rainbowI-compressed_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic/m4 bin/crypto_sign_rainbowI-classic_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal/m4 bin/crypto_sign_rainbowI-circumzenithal_m4_hashing.bin
# tweaked parameter sets (direct F_16 presentation)
# test
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_test.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_test.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_test.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_test.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_test.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_test.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_test.bin
# speed
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_speed.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_speed.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_speed.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_speed.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_speed.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_speed.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_speed.bin
# testvectors
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_testvectors.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_testvectors.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_testvectors.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_testvectors.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_testvectors.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_testvectors.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_testvectors.bin
# nistkat
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_nistkat.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_nistkat.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_nistkat.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_nistkat.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_nistkat.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_nistkat.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_nistkat.bin
# stack
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_stack.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_stack.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_stack.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_stack.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_stack.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_stack.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_stack.bin
# hashing
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_hashing.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_hashing.bin
USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_hashing.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/ref bin/crypto_sign_rainbowI-classic-tweaked_ref_hashing.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/ref bin/crypto_sign_rainbowI-circumzenithal-tweaked_ref_hashing.bin
USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/ref bin/crypto_sign_rainbowI-compressed-tweaked_ref_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=0 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-compressed-tweaked/m4 bin/crypto_sign_rainbowI-compressed-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=0 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-classic-tweaked/m4 bin/crypto_sign_rainbowI-classic-tweaked_m4_hashing.bin
PRECOMPUTE_BITSLICING=1 USE_HARDWARE_CRYPTO=1 make IMPLEMENTATION_PATH=crypto_sign/rainbowI-circumzenithal-tweaked/m4 bin/crypto_sign_rainbowI-circumzenithal-tweaked_m4_hashing.bin